Addressing First Layer Adhesion Issues with Artillery 3D Printers<\/h3>\n
Some new users of Artillery 3D printers may encounter issues with printed parts not sticking firmly to the PEI plate, leading to failed prints when the part detaches during printing.<\/p>\n
This problem often stems from the default print profile provided on the Artillery official website, which has an issue with the first-layer settings.<\/p>\n
In the PLA Filament settings<\/strong> within Orca Slicer, under the Advanced<\/strong> tab, you’ll notice the G-code M109 S190<\/strong> . This command instructs the printer to start printing once the nozzle reaches 190\u00b0C. However, even if the nozzle’s first-layer temperature is set to 210\u00b0C, this G-code overrides it and initiates printing at 190\u00b0C.<\/p>\n For many PLA filaments, 190\u00b0C is too low for the first layer. Combined with the printer’s default first-layer speed of 50mm\/s and the part cooling fan only starting from the second layer onward, this can result in poor adhesion to the PEI plate.<\/p>\n Many users may not notice this detail, leading to a frustrating experience with the 3D printer.<\/p>\n To improve first-layer adhesion and avoid print failures, it\u2019s important to adjust filament settings and amend the start G-code.<\/p>\n 1. Amend the Start G-code 2. Optimize First-Layer Settings<\/strong><\/p>\n <\/p>\n 3. Alternative for Higher Speeds<\/strong> By making these adjustments, you can ensure a smoother printing experience and significantly reduce the likelihood of first-layer failures.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/article>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n [\/et_pb_text][\/et_pb_column][\/et_pb_row][et_pb_row column_structure=”1_3,1_3,1_3″ _builder_version=”4.27.4″ _module_preset=”default” global_colors_info=”{}”][et_pb_column type=”1_3″ _builder_version=”4.27.4″ _module_preset=”default” global_colors_info=”{}”][et_pb_image src=”https:\/\/builditfull.com\/site\/wp-content\/uploads\/2020\/12\/Orca_Artillery_PLA_Filament_Setting_01.png” title_text=”Orca_Artillery_PLA_Filament_Setting_01″ _builder_version=”4.27.4″ _module_preset=”default” hover_enabled=”0″ global_colors_info=”{}” show_in_lightbox=”on” sticky_enabled=”0″][\/et_pb_image][\/et_pb_column][et_pb_column type=”1_3″ _builder_version=”4.27.4″ _module_preset=”default” global_colors_info=”{}”][et_pb_image src=”https:\/\/builditfull.com\/site\/wp-content\/uploads\/2020\/12\/Orca_Artillery_PLA_Filament_Setting_02.png” title_text=”Orca_Artillery_PLA_Filament_Setting_02″ _builder_version=”4.27.4″ _module_preset=”default” hover_enabled=”0″ global_colors_info=”{}” show_in_lightbox=”on” sticky_enabled=”0″][\/et_pb_image][\/et_pb_column][et_pb_column type=”1_3″ _builder_version=”4.27.4″ _module_preset=”default” global_colors_info=”{}”][et_pb_image src=”https:\/\/builditfull.com\/site\/wp-content\/uploads\/2020\/12\/Orca_Artillery_PLA_Filament_Setting_03.png” title_text=”Orca_Artillery_PLA_Filament_Setting_03″ _builder_version=”4.27.4″ _module_preset=”default” hover_enabled=”0″ global_colors_info=”{}” show_in_lightbox=”on” sticky_enabled=”0″][\/et_pb_image][\/et_pb_column][\/et_pb_row][\/et_pb_section]<\/p>\n","protected":false},"excerpt":{"rendered":" Addressing First Layer Adhesion Issues with Artillery 3D Printers Some new users of Artillery 3D printers may encounter issues with printed parts not sticking firmly to the PEI plate, leading to failed prints when the part detaches during printing. This problem often stems from the default print profile provided on the Artillery official website, which […]<\/p>\n","protected":false},"author":1,"featured_media":81965,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_et_pb_use_builder":"on","_et_pb_old_content":"","_et_gb_content_width":"2880","footnotes":""},"categories":[1062,1061,342,301],"tags":[],"class_list":["post-81956","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-orca-slicer","category-print-profile","category-software","category-troubleshoot"],"_links":{"self":[{"href":"https:\/\/builditfull.com\/site\/wp-json\/wp\/v2\/posts\/81956","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/builditfull.com\/site\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/builditfull.com\/site\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/builditfull.com\/site\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/builditfull.com\/site\/wp-json\/wp\/v2\/comments?post=81956"}],"version-history":[{"count":5,"href":"https:\/\/builditfull.com\/site\/wp-json\/wp\/v2\/posts\/81956\/revisions"}],"predecessor-version":[{"id":82728,"href":"https:\/\/builditfull.com\/site\/wp-json\/wp\/v2\/posts\/81956\/revisions\/82728"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/builditfull.com\/site\/wp-json\/wp\/v2\/media\/81965"}],"wp:attachment":[{"href":"https:\/\/builditfull.com\/site\/wp-json\/wp\/v2\/media?parent=81956"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/builditfull.com\/site\/wp-json\/wp\/v2\/categories?post=81956"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/builditfull.com\/site\/wp-json\/wp\/v2\/tags?post=81956"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}How to Resolve the Issue<\/h3>\n
<\/strong>Update the G-code to ensure the nozzle reaches the correct temperature before printing begins. Replace M109 S190<\/strong> with M109 S{nozzle_temperature_initial_layer[initial_extruder]}<\/strong>. This change ensures the nozzle will heat to the temperature you\u2019ve set for the first layer before starting the print.<\/p>\n\n
\n
If you prefer to keep the default first-layer speed of 50mm\/s, increase the nozzle temperature for the first layer to 220\u00b0C<\/strong>. This approach has been tested and proven effective.<\/p>\n