ELEGOO Neptune 4 pro
$450.00 $360.00
Klipper enabled high speed 3D printer
The printer only come with minimum PLA for testing purposes, we suggest to get the option with 1kg PLA if you are a new user.
Note: Elegoo stop including the Scraper and Flush cutter in the box since 2nd half of the year 2023 production.
Moving Out Clearing Stock while stock last
(Can not use coupon or points for discount)
In stock
Speed Up Printing with Klipper
With the Klipper motherboard and ARM 64-bit 1.5G main frequency quad-core processor to process and execute commands faster, Neptune 4 Pro can print at up to 500mm/s, allowing you to complete your print projects quickly and efficiently. With our pre-installed Klipper firmware, you can start printing right away without the hassle of firmware installation.
In addition, it supports input shaping, which helps eliminate artifacts and resonances on the model surface, and pressure advance, which helps predict nozzle pressure for more accurate and consistent extrusion and less filament ooze and blobbing.
Potent Extrusion & Upgraded Hotend
The printer’s dual-gear direct drive extruder is another key feature that ensures smooth and consistent extrusion, weighing only 75% of the weight of the Neptune 3 Pro.
The 5.2:1 reduction ratio and dual-gear design ensure a firm grip on the filament and prevent the flexible filament from slipping and grinding. The copper-titanium bi-metal throat pipe has a unique air duct design for faster heat dissipation of the throat pipe and less nozzle clogging.
The 300°C high-temp nozzle with an extended hotend design to fully melt the filament, and you can explore a wider range of materials, such as PLA, PETG, ABS, ASA, TPU, and high-temp filaments like nylon.
(Tips: ABS and ASA filament materials are recommended to be used in conjunction with a 3D Printer Enclosure)
Unparalleled Heat Dissipation Performance
In addition to the two thickened 4015 ball bearing cooling fan on both sides of the print head, there are four 4020 ball bearing auxiliary fans behind the print head, which ensures omnidirectional rapid cooling of the newly printed layers even at a fast printing speed, and the deposited hot filament quickly bond together for better overhang and bridge results.
Stable & Quiet Printing
The ELEGOO Neptune 4 Pro 3D printer is designed for quiet and precise printing with its silent drivers for all axes, reducing noise to below 50db. Its wear-resistant POM V-guide wheels moves quietly, smoothly, and accurately.
The Z-axis dual lead screw + Z-axis dual motor design provides better synchronization, increasing the accuracy and stability of the print head movement.
Smoother Model Surface
Support advanced functions like input shaping and pressure advance to achieve smooth model surface and consistent extrusion
Intelligent Segmented Heatbed
With 100W+150W power output, the slicing software automatically recognizes the size of the model during slicing and activates the peripheral heating zone if the model size exceeds the center heating zone (120mmx120mm).
The two partitions can also be turned on and off manually for more precise temperature control.
Additionally, the surface of the PEI magnetic platform is marked for guidance.
PEI magnetic platform
PEI magnetic platform with special coating and spring steel sheet for good adhesion and warping resistance, so that the printed models can be easily removed or ejected by bending the print steel sheet.
The 250W hotbed can quickly heat up to 110°C.
Intelligent 3D Printing
No worry about unexpected power failure during printing since the printer can resume printing after the power supply is restored.
Whenever the filament runs out or breaks, the printer will pause and alarm to prevent wasted materials and scrapped models.
Support LAN networking printing
Support LAN networking printing, once connected, you can use the WEB terminal to remote control and monitor your printer.
Additional information
| Weight | 11.6 kg |
|---|---|
| Dimensions | 63 × 49 × 24 cm |
| Build Volume | 225 x 225 x 265mm |
| Connectivity | LAN (RJ45), WiFi (Possible, USB wireless adapter needed), Micro SD Card, USB Cable |
| Extruder Quantity | Single Extruder |
| Nozzle Temperature | Upto 300c |
| Filament-diameter | 1.75mm |
| Build Platform / Bed Temperature | PEI Spring Steel Magnetic Build Plate, Upto 110° C |
| Nozzle Diameter | 0.4mm |
| Filament Runout Sensor | Yes |
| Resume Printing | Yes |
| Print Technology | FDM/FFF |
| Printing Material | TPU, ABS, PLA, PETG |
| Software | Cura, Simplify 3D (purchase separately) |
| Supports (OS) | Windows, Mac OS |
| Silent Board | Yes |
| Auto Bed Leveling | Yes |
| Rated voltage | 100-240V 50/60Hz |
| Printing Speed | 30-500mm/s (Suggested Speed: 250mm/s) |
| Machine Dimension | 475 x 445 x 515 mm³ |
| Net / Gross Weight | 8.9kg / 13.92kg |
