BLTouch Auto Bed Leveling Sensor for CR and Ender Series 8 Bit Board

Installation for Ender 3 V2

Link to download firmware: https://www.creality.com/download
The file format is rar, you may need a rar extractor.

Download this:
14 Nov 2020
4.2.2 Ender-3 v2 Marlin2.0.1 BLtouchV1.3.1with adapter board firmware.rar

Download mount for Ender 3 V2 here: https://www.thingiverse.com/thing:4462870

BL Touch installation for CR-10S / CR-10 S4 / CR-10 S5, Endstop (Red connector) need to swap the wire.

https://www.youtube.com/watch?v=P2hI-aYhnOM

BL Touch is an auto-leveling sensor for 3D Printers that can precisely measure the tilt of the bed surface. It could work with any kinds of bed materials, such as glasses, woods, metals, and so on.

BLTouch is fulfilled with simple structure and high precision by using progressively designed solenoid and hall sensors. It aims for user convenience and enjoyable printing by adding many smart functions, such as self-test, alarm, alarm release & Touch Switch mode, Blue LED for servo signal indicating, and Z-probe(Zmin) Testing.

• Features：
  The main functions and controls of BLTouch are the same as the usual auto bed leveling sensor, which consists of an RC servo and microswitch. Thus, BLTouch can be applied on almost every board.
  Self-test： The push pin operates two times in a test when the power is on.
  Alarm：The LED light blinks if a problem was found on a self-test or during operation
  Wiring defect indicator：Blue and Red LED for indicating wiring defects.
• Easy to Use: This auto bed leveling sensor makes it easier to level the hotbed, which can precisely measure the tilt of the Bed surface. Bed leveling is not a problem anymore.
• Intelligence self - check and alarm: The function of auto leveling is adopted to make it easier to use and to increase the success rate of shaping.

Fit:

CR Series: CR10

Ender Series:  Ender 3, Ender 3 Pro, Ender 3 V2, Ender 5, Ender 5 Pro