Description
Build It Full PLA filaments are formulated with TotalEnergies Corbion biopolymer.
TotalEnergies Corbion is a global technology leader in Poly Lactic Acid (PLA) and lactide monomers. PLA is a biobased, recyclable, and biodegradable polymer made from annually renewable resources, offering a reduced carbon footprint versus traditional plastics. TotalEnergies Corbion, headquartered in the Netherlands, operates a 75,000 tons per year PLA production facility in Rayong, Thailand. The company is a 50/50 joint venture between TotalEnergies and Corbion.
Luminy® neat resins from TotalEnergies Corbion are compliant with the relevant regulations and standards related to bioplastics:
- Approved for use in food contact applications in EU (EC No. 10/2011), USA (FDA 21 CFR) and China (GB 9685-2016)
- Compliant with EN13432 and ASTM D6400 standards for industrial composting
- Biobased content of 100% according to EN16785-1 and ASTM D6866
- REACH compliant
- Reduced carbon footprint (read more in:peer reviewed LCA study)
- Made from GMO-free crops
| PLA PLA+ PLA-PH Data Sheet | ||||
| Properties | PLA | PLA+ | PLA-PH | Test Method |
| Tensile Strength at Yield (MPa) | 45 MPa | 58 MPa | 480 MPa | ASTM D638 |
| Tensile Elongation at Break (%) | 3.5% | 32% | 23% | ASTM D638 |
| Notched Izod Impact (23°C) (kJ/m²) | 2.1 kJ/m² | 24 kJ/m² | 63 kJ/m² | ASTM D256 |
| Flexural Strength (MPa) | 62 MPa | 71 MPa | 850 MPa | ASTM D790 |
| Flexural Modulus (MPa) | 3500 MPa | 3251 MPa | 33000 MPa | ASTM D790 |
| Heat Deflection at 66psi | 55 °C | 55 °C | 65 – 68 °C | ASTM E2092 |
| Specific Gravity | 1.24 g/cm³ | 1.23 g/cm³ | 1.2 g/cm³ | ASTM D792 |
| Melt Mass-flow Rate g/10 min (190°C, 2.16 kg) | 3 – 5 g/10 min | 4 – 9 g/10 min | 3 – 8 g/10 min | ASTM D1238 |
1.75mm 1kg PLA filament
Suitable for most 3D printers.
Extruder temperature: 200°C – 220°C
Heated bed temperature: 0°C to 60°C
Density: 1.24 g/cm3
1. PLA is biodegradable, non-harmful, non-toxic and environmentally friendly.
2. Good material toughness and good material strength.
3. Low material shrinkage rate and uniform diameter.
4. Suitable for complex models.
Filament net weight: 1kg
Spool weight: 200g
Box Weight: 100g
Spool: 200mm (Outer Diameter) * 55mm (Inner Diameter) * 65mm (Height)
All filaments are packed in vacuum sealed plastic bag with silica gel.
Tips:
• To avoid moisture, keep the filament with zip-lock bag when it’s not in use.
• Attach the filament end to the side of the spool with small binder clip.
