Print Profile

Download Filament Setting at MakerWorld

Bambu Lab 3D Printer users
You can now search for “Build It Full Official” in Bambu Studio or MakerWorld to download the exact filament settings we use on our Bambu Lab X1C!

Community Contributions
Have you dialed in an awesome print profile for one of our filaments? We’d love for you to share it on MakerWorld or send it over to us! We regularly share top community-submitted profiles to help other makers, and we’ll always credit your contribution.

Bmabu Lab 3D Printers

Print Profile: Generic PLA High Speed
Enclosure: Open

Elegoo Centauri Carbon

Print Profile: Elegoo RAPID PLA+
Enclosure: Open

Nozzle
First layer: 220ºc Other layers: 220ºc
Textured PEI Plate
First layer: 60ºc Other layers: 60ºc
Volumetric speed limitation
Max Volumetric Speed: 21mm³/s

Artillery SW-X4 Pro

Nozzle
First layer: 230ºc Other layers: 230ºc
Textured PEI Plate
First layer: 70ºc Other layers: 70ºc
Volumetric speed limitation
Max Volumetric Speed: 21mm³/s

Other 3D Printers

Print Profile: Generic PLA High Speed

Bmabu Lab 3D Printers

Option 1

Print Profile: Generic PETG HF
Enclosure: Open

Option 2

Print Profile: Bambu PETG HF (modify)
First layer: 230ºc Other layers: 240ºc (if too stringing or too hot and surface become rough lower the temperature to 235ºc or 230ºc)
Enclosure: Open

Elegoo Centauri Carbon

Nozzle
First layer: 220ºc Other layers: 220ºc
Textured PEI Plate
First layer: 70ºc Other layers: 70ºc
Volumetric speed limitation
Max Volumetric Speed: 16mm³/s

Enclosure: Open

Artillery SW-X4 Pro

Nozzle
First layer: 230ºc Other layers: 230ºc
Textured PEI Plate
First layer: 70ºc Other layers: 70ºc
Volumetric speed limitation
Max Volumetric Speed: 21mm³/s

Other 3D Printers

Print Profile: Generic High Speed PETG
Enclosure: Open

Note:
If you notice the printed surface is rough it could be the printing speed is not fast enough, can try to change the nozzle temperature to 220ºc, or make the printing speed and cooling fan higher.

Bmabu Lab 3D Printers

Print Profile: Generic PLA
Nozzle
Initial layer: 210ºc to 220ºc  Other layers: 210ºc to 220ºc

If having first layer adhesion issue, change the Texture PEI Plate setting
Texture PEI Plate
Initial layer: 60ºc    Other layers: 60ºc

Volumetric speed limitation
Max Volumetric Speed: 12mm³/s

Cooling for specific layer
Special cooling setting
For the first: 3 layers   Fan speed: 0%

Elegoo Centauri Carbon

Print Profile: Generic PLA

Volumetric speed limitation
Max Volumetric Speed: 12mm³/s

Artillery SW-X4 Pro

Print Profile: Generic PLA

Volumetric speed limitation
Max Volumetric Speed: 12mm³/s

Other Klipper Based 3D Printers

Print Profile: Generic PLA
Printing speed: <250mm/s
Nozzle First layer: 220ºc Other layers: 220ºc / 210ºc
Bed temperature First layer: 60ºc Other layer: 60ºc
Volumetric speed limitation
Max Volumetric Speed: 12mm³/s

Other Marlin Based 3D Printers

Print Profile: Generic PLA

Printing speed: 50mm/s
Nozzle First layer: 210ºc Other layers: 200ºc / 210ºc
Bed temperature First layer: 60ºc Other layer: 60ºc

Bmabu Lab 3D Printers

Print Profile: Generic PLA Silk

Elegoo Centauri Carbon

Print Profile: Elegoo PLA Silk

Artillery SW-X4 Pro

Print Profile: Generic PLA (need modification)
Change the Max volumetric speed: 7.5mm³/s

Other Klipper Based 3D Printers

Print Profile: Generic PLA Silk (if available)
Else can use Generic PLA and change the Max volumetric speed: 7.5mm³/s

Other Marlin Based 3D Printers

Print Profile: Generic PLA / Generic PLA Silk (if available)
Printing speed 50mm/s
Nozzle: 200 to 210ºc
PEI Texture Plate: 55 to 60ºc

Bmabu Lab 3D Printers

Print Profile: Generic PETG (need modification)
Change nozzle to 240ºc
PEI Texture Plate: 70 to 80ºc
Max volumetric speed: 12mm³/s

Cooling for specific layer
Special cooling setting
For the first: 3 layers   Fan speed: 0%

Elegoo Centauri Carbon

Print Profile: Elegoo PETG Pro

Artillery SW-X4 Pro

Print Profile: Generic PETG (need modification)
Change the Flow Ratio: 0.95

Other Klipper Based 3D Printers

Print Profile: Generic PETG (if available)
Else can use Generic PETG and change the Flow Ratio accordingly, can try 0.95

Other Marlin Based 3D Printers

Print Profile: Generic PETG
Printing speed 50mm/s
Nozzle: 220 to 250ºc
PEI Texture Plate: 60 to 100ºc (We use 70c to 80c on our PEI Plate)
Change the Flow Ratio: 0.95

Bmabu Lab 3D Printers

Print Profile: Generic PETG (need modification)
Change nozzle to 240ºc
PEI Texture Plate: 50 to 60ºc
Max volumetric speed: 12mm³/s

Cooling for specific layer
Special cooling setting
For the first: 3 layers   Fan speed: 0%

Elegoo Centauri Carbon

Print Profile: Elegoo PETG Pro
PEI Texture Plate: 50 to 60ºc
Max volumetric speed: 12mm³/s

Artillery SW-X4 Pro

Print Profile: Generic PETG (need modification)
Change the Flow Ratio: 0.95
PEI Texture Plate: 50 to 60ºc
Max volumetric speed: 12mm³/s

Other Klipper Based 3D Printers

Print Profile: Generic PETG (if available)
Else can use Generic PETG and change the Flow Ratio accordingly, can try 0.95
PEI Texture Plate: 50 to 60ºc
Max volumetric speed: 12mm³/s

Other Marlin Based 3D Printers

Print Profile: Generic PETG
Printing speed 50mm/s
Nozzle: 220 to 250ºc
PEI Texture Plate: 50 to 60ºc (We use 55c to 60c on our PEI Plate)
Change the Flow Ratio: 0.95

Bmabu Lab 3D Printers

Note:
Heated bed temperature MUST be lower else the Matte PETG will stick too firm on the bed.
You can try the original flow ratio 0.98, if it’s over extrusion then change can adjust from this range 0.8 to 0.85. So far we tested different brand of our 3D printers 0.82 is what we are comfortable setting.

Print Profile: Generic PETG (need modification)
Change below setting:
Basic Information
Flow ratio: 0.82 (over or under extrusion, can adjust from this range 0.8 to 0.85)
Nozzle
Initial layer: 240ºc   Other layer: 240ºc
Texture PEI Plate
Initial layer: 50ºc to 60ºc   Other layer: 50ºc to 60ºc

Elegoo Centauri Carbon

Print Profile: Generic PETG-CF (need modification)
Texture PEI Plate
Initial layer: 50ºc to 60ºc   Other layer: 50ºc to 60ºc
Flow ratio: 0.82 (over or under extrusion, can adjust from this range 0.8 to 0.85)

Artillery SW-X4 Pro

Print Profile: Generic PETG (need modification)
Change the Flow Ratio: 0.85
Texture PEI Plate
Initial layer: 50ºc to 60ºc   Other layer: 50ºc to 60ºc

Other Klipper Based 3D Printers

Print Profile: Generic PETG (if available)
Else can use Generic PETG and change the Flow Ratio accordingly, can try 0.85
Texture PEI Plate
Initial layer: 50ºc to 60ºc   Other layer: 50ºc to 60ºc

Other Marlin Based 3D Printers

Print Profile: Generic PETG
Printing speed 50mm/s
Nozzle: 230ºc to 250ºc
PEI Texture Plate: 50ºc to 60ºc

ABS +
Nozzle: 230ºc – 240ºc
Build Plate: 30ºc – 80ºc

ABS
Nozzle: 240ºc – 260ºc
Build Plate: 100ºc – 120ºc