Luminous PLA Filament 1.75mm 1kg Build It Full

$23.00 $20.70

Please note that Luminous PLA is abrasive, we recommended to use stainless steel or hardened steel nozzles to print these filament.

  • Filament net weight 1kg
  • Easy to print
  • Vacuum sealed with silica gel

Build It Full PLA filaments are fomulated with TotalEnergies Corbion biopolymer.

TotalEnergies Corbion is a global technology leader in Poly Lactic Acid (PLA) and lactide monomers. PLA is a biobased, recyclable, and biodegradable polymer made from annually renewable resources, offering a reduced carbon footprint versus traditional plastics. TotalEnergies Corbion, headquartered in the Netherlands, operates a 75,000 tons per year PLA production facility in Rayong, Thailand. The company is a 50/50 joint venture between TotalEnergies and Corbion.

Luminy® neat resins from TotalEnergies Corbion are compliant with the relevant regulations and standards related to bioplastics:

  • Approved for use in food contact applications in EU (EC No. 10/2011), USA (FDA 21 CFR) and China (GB 9685-2016)
  • Compliant with EN13432 and ASTM D6400 standards for industrial composting
  • Biobased content of 100% according to EN16785-1 and ASTM D6866
  • REACH compliant
  • Reduced carbon footprint (read more in:peer reviewed LCA study)
  • Made from GMO-free crops

 

 PLA PLA+ PLA-PH Data Sheet
Properties PLA PLA+ PLA-PH Test Method
Tensile Strength at Yield (MPa) 45 MPa 58 MPa 480 MPa ASTM D638
Tensile Elongation at Break (%) 3.5% 32% 23% ASTM D638
Notched Izod Impact (23°C) (kJ/m²) 2.1 kJ/m² 24 kJ/m² 63 kJ/m² ASTM D256
Flexural Strength (MPa) 62 MPa 71 MPa 850 MPa ASTM D790
Flexural Modulus (MPa) 3500 MPa 3251 MPa 33000 MPa ASTM D790
Heat Deflection at 66psi 55 °C 55 °C 65 - 68 °C ASTM E2092
Specific Gravity 1.24 g/cm³ 1.23 g/cm³ 1.2 g/cm³ ASTM D792
Melt Mass-flow Rate g/10 min (190°C, 2.16 kg) 3 - 5 g/10 min 4 - 9 g/10 min 3 - 8 g/10 min ASTM D1238

 

1.75mm 1kg PLA filament

Suitable for most 3D printers.

*Please note that Luminous PLA is abrasive, we recommended to use stainless steel or hardened steel nozzles to print these filament.

Extruder temperature: 200°C - 220°C
Heated bed temperature: 0°C to 60°C
Density: 1.24 g/cm3

1. PLA is biodegradable, non-harmful, non-toxic and environmentally friendly.
2. Good material toughness and good material strength.
3. Low material shrinkage rate and uniform diameter.
4. Suitable for complex models.

Filament net weight: 1kg
Spool weight: 200g
Box Weight: 100g
Spool: 200mm (Outer Diameter) * 55mm (Inner Diameter) * 65mm (Height)

All filament will be packed in vacuum sealed plastic bag with silica gel.

Tips:
• To avoid moisture, keep the filament with zip-lock bag when it's not in use.
• Attach the filament end to the side of the spool with small binder clip.

Additional information

Weight 1.3 kg
Dimensions 21 × 21 × 7 cm
Colour

Luminous Blue, Luminous Green

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.