Description
Hi-Speed PETG Filament: High gloss & high toughness. Excellent impact resistanc and chemical resistance. Good stability, no cracking, no warping. Environmentally friendly, non-toxic and low odour.
Excellent Dimensional Stability: Made from PETG plastic, which is known for its ease of use (like PLA) and durable strength (like ABS), provides light bed adhesion, high strength and a glossy finish.
Less-Tangle & Neatly Wound: All PETG Pro filaments are neatly wound on eco-friendly cardboard spools. Fully mechanical winding with strict manual inspection minimizes possible tangles and knots.
No Clogging or Bubble: All filaments are completely dried before packing and vacuum sealed with desiccants to ensure the filaments remain dry and moisture-free, preventing clogs and bubbles during printing.
Extremely High Success Rate: Perfect roundness and very tight diameter tolerance ensures an even feed and stable prints. You will achieve a wonderful printing experience.
Printing Temperature: 220 – 260℃
Bed temp: 75 – 90℃
Printing Speed: 50 – 350mm/s
Dry filament: Yes
Drying temperature: 65°C / 6 hours
Heated bed bonding: Apply glue when needed
Bmabu Lab 3D Printers Setting: Can use Generic PETG HF Print Profile
Check out print profile| Hi-Speed PETG Data Sheet | ||
| Properties | Test Standard | |
| Tensile Strength (MPa) | 59.04±10% | ASTM D638 |
| Elongation At Break (%) | 15.97±10% | ASTM D638 |
| Flexural strength (MPa) | 70.84±10% | ASTM D790 |
| Flexural Modulus (MPa) | 2038.70±10% | ASTM D790 |
| Notched Impact strength (J/m) | 19.7±10% | ASTM D256 |
| Heat deflection (HDT) at 0.45 MPa | 69ºC | ASTM D648 |
| Density (g/cm³) | 1.23~1.31 | GB/T22235 |
| Melt mass-flow rate (MFR) (g/10min) | 24g/10min (230℃,2.16Kg) | ASTM D1238 |
Filament net weight: 1kg
Spool weight: 200g
Box Weight: 100g
Spool: 200mm (Outer Diameter) * 55mm (Inner Diameter) * 65mm (Height)
All filaments are packed in vacuum sealed plastic bag with silica gel.
Tips:
• To avoid moisture, keep the filament with zip-lock bag when it’s not in use.
• Attach the filament end to the side of the spool with small binder clip.
Reviews
There are no reviews yet.